Tenacity Dhuwur Industri Serat Benang Multifilamen Elongasi Kurang Gesekan Tahan Gesekan Poliester PET PES
Benang poliester industri nuduhake filamen industri poliester sing kuwat lan kasar kanthi kehalusan ora kurang saka 550 dtex.Miturut kinerja, bisa dipérang dadi jinis extension kurang kekuatan dhuwur (jinis standar biasa), modulus dhuwur jinis shrinkage kurang, kekuatan dhuwur jinis shrinkage kurang, lan jinis aktif adhesive.Antarane wong-wong mau, modulus dhuwur serat polyester industri shrinkage kurang mboko sithik ngganti serat polyester industri standar biasa ing ban lan produk karet mechanical amarga sifat banget kayata kekuatan bejat dhuwur, modulus elastis dhuwur, elongation kurang, lan resistance impact apik.Kekuwatan dhuwur serat poliester industri elongasi kurang nduweni karakteristik kekuatan dhuwur, elongasi kurang, modulus dhuwur, lan nyusut panas garing dhuwur sing utamané digunakake minangka tali ban lan sabuk conveyor, kanvas warp, lan sabuk safety kendaraan lan sabuk conveyor.Serat poliester industri kanthi kekuatan dhuwur lan kurang nyusut sawise digawe panas, lan kain utawa produk karet sing dirajut nduweni stabilitas dimensi sing apik lan stabilitas tahan panas, bisa nyerep beban impact, lan nduweni karakteristik nilon sing alus.Utamane digunakake kanggo nutupi kain (iklan kain kothak cahya, lan sapiturute), conveyor belt wefts, etc. teknik lan ningkatake kualitas produk.
Tujuan asli pangembangan serat mutifilamen poliester industri yaiku nggunakake poliester kanggo ngganti rayon, nilon 6, nilon 66, lan liya-liyane minangka bahan rangka penguat produk karet.Produk kasebut kalebu kain tali ban radial, kain tali sabuk conveyor karet, sabuk V, kabel sabuk transmisi, kabel selang karet lan kain kabel, lsp.
1. Biasa radial kain ari ban standar (biasa) industri serat filamen polyester uga dikenal minangka kekuatan dhuwur serie extension kurang kang kekuatan dhuwur, elongation kurang lan shrinkage termal dhuwur.Kain ari sing ditenun saka serat industri iki nduweni karakteristik kekuatan dhuwur lan elongasi sing kurang ing beban sing tetep, nanging tingkat penyusutan panas garing relatif dhuwur.Mulane, nalika nggunakake kain ari iki kanggo nggawe ban, kedadean saka joints cekung ketok.Sampeyan kudu dikembangake lan dibentuk lan mung divulkanisir ing suhu kamar.Wektu vulkanisasi dawa, tingkat kethokan ban dhuwur, efisiensi produksi kurang, lan kelas ban sing digawe kurang, sing ora bisa nyukupi syarat ban radial kanthi kinerja dhuwur.
2. Ing lapangan sabuk conveyor ing taun anyar utamané kanggo tambang batu bara conveyor sabuk, paling saka sabuk conveyor digawe saka kekuatan dhuwur serat polyester industri shrinkage kurang minangka bahan balung utama duwe kaluwihan saka kekuatan dhuwur, awak sabuk lancip, keluwesan apik lan tatanan alur.
1) Resistance impact dhuwur nggawe sabuk convypor nduweni kekuatan sing apik lan tahan kesel.
2) Modulus dhuwur supaya faktor safety sabuk conveyor polyester bisa luwih murah tinimbang nilon.
3) Ketahanan kelembapan sing apik nggawe sabuk konvepor bisa njaga kekuwatane ora owah sawise lembab sing cocog kanggo digunakake ing tambang udan.
4) Ekstensi beban pancet cilik, stabilitas dimensi apik, lan stroke tension belt conveyor cilik sing ngilangi kabutuhan penyesuaian maneh amarga deformasi peregangan.
3. Tali kanggo sabuk conveyor V-belt nduweni kekuatan lan modulus awal sing luwih dhuwur tinimbang rayon minangka kabel sing digawe saka serat mutifilament poliester industri sawise twisting dhisikan, twisting pindho, lan dipping lan nduweni kinerja lemes ngasilaken apik.Iki digunakake digunakake ing sabuk conveyor segi telu saka macem-macem spesifikasi.
4. Tali sing digawe saka serat mutifilamen poliester industri kanthi cara twisting lan mbentuk (utawa dipping) minangka bahan rangka paling becik kanggo produksi selang kepang lan selang gulung.Tali poliester ora mung nduweni kekuatan dhuwur, stabilitas dimensi sing apik, nanging uga nduweni stabilitas kimia sing apik.Ora kaya serat vinylon minangka balung selang, bakal resinisasi nalika kena banyu sing bakal mengaruhi umur layanan selang.
5. Kekuwatan dhuwur nyandhang produk serat polyester industri tahan sing teknis apik ing asli kekuatan dhuwur serat polyester industri kekuatan kurang kanggo sabuk safety kendaraan ngganti benang industri diimpor lan digunakake minangka benang khusus kanggo sabuk safety kendaraan.Sabuk pengaman banget goresan, atos, kuwat lan awet.Produk iki uga akeh digunakake ing ngangkat sabuk.
Paramèter
| Daftar Produk | Aplikasi Utama |
| ◎ General High Tenacity (GHT) | Lifting belt, Convyor belt, Fire hose, Hose, Fastening belt, Fishing net, Tali, Geotextile, Geogrid |
| ◎ Tahan Gesekan Dhuwur (FHT) | Sabuk pengaman mobil lan aricraft, Sabuk, Tali Pundhak, Jaring perlindungan bayi |
| ◎ High Tenacity Low Elongation (HTLE) | Kain geoteknik, Kisi-kisi Earthwork, Tali |
| ◎ High Tenacity Low Shrinkage (TLS) | Kain iklan kanggo kothak cahya, Kanvas, Tarpaulin, Struktur membran saka kain sing dilapisi |
| ◎ High Tenacity Super Low Shrinkage (SLS) | Kain iklan kanggo kothak cahya, Kanvas, Tarpaulin, Struktur membran saka kain sing dilapisi |
| ◎ High Modulus Low Shrinkage (HMLS) | Tali ban, Geogrid, Triangle blet, Dip cord |
| ◎ Adhesive Activated (AA) | Dicelup kanvas, Conveyor belt, selang karet |
| ◎ High Tenacity Low Denier Benang (HTLD) | Benang jahit, Tali lan Jaring, Pita, Tessforest, Kain Coating/Laminating |
| ◎ Benang Tenacity Sedheng (MSST, LDLS) | Benang jahit, Tali lan Jaring, Anyaman, Airbag, Lapisan/Laminating kain |
| ◎ Polyester Super Staple (PSSY) | Kertas khusus, Pengisi penguat bahan komposit (beton aspal, kapal, kapal perang lan cat), produk berkelompok |
| ◎ FDY (Super Bright, SD, Colored) | Kain rajutan, tas lan kain koper |
Umum High Tenacity Polyester (GHT)
| Item No | Kapadhetan Linear (dtex/f) | Pecah Force (N) | Elongate ing Break (%) | Break Tenacity (G/D) | EASL (@4.0cN/dtex) (%) | HAS (177 ℃ x 1 menit 0,05G/D) (%) | Bobot Bobbin (kg) | Ukuran Tube (mm) |
| AP-GHT-840 | 930/192 | 76.1 | 14 | 9,2 | 5.2 | 7 | 10 | 125*140*200 |
| AP-GHT-1000 | 1110/192 | 91.1 | 14 | 9.2 | 5.5 | 7 | 10 | 125*140*200 |
| AP-GHT-1300 | 1440/192 | 117.5 | 14 | 9.2 | 6 | 7 | 11 | 94*108*200 |
| AP-GHT-1500 | 1670/192 | 136.5 | 14 | 9.2 | 6 | 7 | 11 | 94*108*200 |
| AP-GHT-2000 | 2220/384 | 182.3 | 14 | 9.2 | 6.5 | 7 | 10 | 125*140*200 |
| AP-GHT-2600 | 2890/384 | 237.3 | 14 | 9.2 | 7 | 7 | 11 | 94*108*200 |
| AP-GHT-3000 | 3330/384 | 273 | 14 | 9.2 | 7 | 7 | 11 | 94*108*200 |
| AP-GHT-4000 | 4440/768 | 360 | 14 | 9.1 | 7 | 7 | 10 | 125*140*200 |
| AP-GHT-5000 | 5550/768 | 445.6 | 15.5 | 9.1 | 7 | 7 | 12 | 94*108*300 |
| AP-GHT-6000 | 6660/768 | 539.2 | 15.5 | 9.1 | 7.5 | 7 | 12 | 94*108*300 |
Aplikasi utama:
Sabuk segitiga, sabuk angkat, sabuk konveyor, selang pemadam kebakaran, selang, sabuk pengikat, sabuk bagasi, jaring ikan, tali, kabel, kabel inti, geotekstil, geogrid
Poliester Tahan Gesekan Dhuwur (FHT)
| Item No | Kapadhetan Linear (dtex/f) | Pecah Force (N) | Elongate ing Break (%) | Break Tenacity (G/D) | EASL (@4.0cN/dtex) (%) | HAS (177 ℃ x 1 menit 0,05G/D) (%) | Bobot Bobbin (kg) | Ukuran Tube (mm) |
| AP-FHT-1000 | 1110/96 | 87.8 | 14 | 8.9 | 7 | 6.5 | 10 | 94*108*200 |
| AP-FHT-1500 | 1670/96 | 131.4 | 14 | 8.9 | 6.5 | 6.5 | 10 | 94*108*200 |
| AP-FHT-1500 | 1670/144 | 132.6 | 14 | 9 | 7 | 7.5 | 10 | 94*108*200 |
Aplikasi utama:
Kain Kapadhetan Dhuwur, Geotextile, Geogrid
High Tenacity Low Shrinkage Polyester (TLS)
| Item No | Kapadhetan Linear (dtex/f) | Pecah Force (N) | Elongate ing Break (%) | Break Tenacity (G/D) | HAS (177 ℃ x 1 menit 0,05G/D) (%) | Bobot Bobbin (kg) | Ukuran Tube (mm) |
| AP-TLS-850 | 940/192 | 65.8 | 20 | 7.9 | 3.25 | 10 | 125*140*200 |
| AP-TLS-940 | 1043/192 | 73.5 | 20 | 8 | 3.25 | 10 | 125*140*200 |
| AP-TLS-1000 | 1110/192 | 79.2 | 21 | 8 | 3.25 | 10 | 125*140*200 |
| AP-TLS-2000 | 2220/384 | 158.3 | 21 | 8 | 3.25 | 10 | 125*140*200 |
| AP-TLS-3000 | 3330/384 | 236.4 | 22 | 8 | 3.25 | 10 | 125*140*200 |
Aplikasi utama:
Kain Dilapisi, Kanvas, Tenda kanggo Mobil, Bahan Inflatable, Kain Shade, Kain Anti Air, Kain Kotak Lampu Iklan, Payung Pantai, Kain Bangunan, Kain Filter lan Bahan Tas
High Tenacity Super Low Shrinkage (SLS)
| Item No | Kapadhetan Linear (dtex/f) | Pecah Force (N) | Elongate ing Break (%) | Break Tenacity (G/D) | HAS (177 ℃ x 1 menit 0,05G/D) (%) | Bobot Bobbin (kg) | Ukuran Tube (mm) |
| AP-SLS-500 | 560/96 | 35 | 21 | 7.1 | 2.5 | 9 | 94*108*200 |
| AP-SLS-840 | 930/192 | 64.9 | 22 | 7.8 | 2.25 | 11 | 94*108*200 |
| AP-SLS-1000 | 1110/192 | 76.9 | 22 | 7.8 | 2.25 | 11 | 94*108*200 |
| AP-SLS-1300 | 1440/192 | 99.7 | 22 | 7.8 | 2.25 | 10 | 125*140*200 |
| AP-SLS-1500 | 1670/192 | 115.2 | 22 | 7.8 | 2.25 | 10 | 125*140*200 |
| AP-SLS-2000 | 2220/384 | 153.9 | 22 | 7.8 | 2.25 | 10 | 125*140*200 |
| AP-SLS-3000 | 3330/384 | 229.8 | 22 | 7.8 | 2.25 | 10 | 125*140*200 |
Aplikasi utama:
Kain Dilapisi, Kanvas, Tenda kanggo Mobil, Bahan Inflatable, Kain Shade, Kain Anti Air, Kain Kotak Lampu Iklan, Payung Pantai, Kain Bangunan, Fasilitas Lawn, Kain Filtrasi, Bahan Tas, Bandara lan Pusat Pameran Bahan Struktur Membran.
High Modulus Low Shrinkage Polyester (HMLS)
| Item No | Kapadhetan Linear (dtex/f) | Pecah Force (N) | Elongate ing Break (%) | Break Tenacity (G/D) | EASL (@4.0cN/dtex) (%) | HAS (177 ℃ x 1 menit 0,05G/D) (%) | Bobot Bobbin (kg) | Ukuran Tube (mm) |
| AP-HMLS-1000 | 1120/240 | 78.4 | 13.5 | 8 | 6 | 2.5 | 12 | 94*110*300 |
| AP-HMLS-1000 | 1120/320 | 80.6 | 12.5 | 8.2 | 5.5 | 3 | 12 | 94*110*300 |
| AP-HMLS-1300 | 1450/360 | 101.5 | 13.5 | 8 | 6 | 2.5 | 11 | 110*124*300 |
| AP-HMLS-1300 | 1450/360 | 104.4 | 12.5 | 8.2 | 5.5 | 3 | 11 | 110*124*300 |
| AP-HMLS-1500 | 1670/360 | 116.9 | 13.5 | 8 | 6 | 2.5 | 11 | 110*126*300 |
| AP-HMLS-1500 | 1670/480 | 120.2 | 12.5 | 8.2 | 5.5 | 3 | 11 | 110*126*300 |
| AP-HMLS-2025 | 2250/480 | 153 | 13.5 | 7.7 | 6 | 3 | 12 | 94*110*300 |
Aplikasi utama:
Ban Mobil, Kain Tirai, Kanvas, Tali, Geotextile.
Adhesive Activated (AA)
| Item No | Kapadhetan Linear (dtex/f) | Pecah Force (N) | Elongate ing Break (%) | Break Tenacity (G/D) | EASL (@4.0cN/dtex) (%) | HAS (177 ℃ x 1 menit 0,05G/D) (%) | Bobot Bobbin (kg) | Ukuran Tube (mm) |
| AP-AA-1010 | 1125/192 | 87.8 | 14 | 8.9 | 6 | 7 | 10 | 125*140*200 |
| AP-AA-1520 | 1685/192 | 131.4 | 14 | 8.9 | 6.5 | 6.5 | 11 | 94*108*200 |
| AP-AA-2025 | 2250/384 | 175.5 | 14.5 | 8.9 | 6.5 | 6.5 | 10 | 125*140*200 |
| AP-AA-2600 | 2890/384 | 225.4 | 14.5 | 8.9 | 6.5 | 6.5 | 10 | 125*140*200 |
| AP-AA-3000 | 3370/384 | 262.9 | 14.5 | 8.9 | 6.5 | 6.5 | 11 | 94*108*200 |
| Item No | Kapadhetan Linear (dtex/f) | Pecah Force (N) | Elongate ing Break (%) | Break Tenacity (G/D) | EASL (@4.0cN/dtex) (%) | HAS (177 ℃ x 1 menit 0,05G/D) (%) | Bobot Bobbin (kg) | Ukuran Tube (mm) |
| AP-AA-1000 | 1115/192 | 87 | 16 | 8.9 | 6.5 | 5 | 10 | 125*140*200 |
| AP-AA-1500 | 1675/192 | 130.7 | 16 | 8.9 | 6.5 | 5 | 11 | 94*108*200 |
| AP-AA-2000 | 2230/384 | 173.9 | 16 | 8.9 | 6.5 | 5 | 10 | 125*140*200 |
| AP-AA-3010 | 3345/384 | 260.9 | 16 | 8.9 | 6.5 | 5 | 11 | 125*140*200 |
| Item No | Kapadhetan Linear (dtex/f) | Pecah Force (N) | Elongate ing Break (%) | Break Tenacity (G/D) | HAS (177 ℃ x 1 menit 0,05G/D) (%) | Bobot Bobbin (kg) | Ukuran Tube (mm) |
| AP-AA-840 | 930/192 | 68.8 | 21 | 8.4 | 4.5 | 10 | 125*140*200 |
| AP-AA-1000 | 1115/192 | 82.5 | 21 | 8.4 | 4.5 | 10 | 125*140*200 |
| AP-AA-1300 | 1440/192 | 106.6 | 21 | 8.4 | 4.5 | 10 | 125*140*200 |
| AP-AA-1500 | 1675/192 | 124 | 21 | 8.4 | 4.5 | 10 | 125*140*200 |
| AP-AA-2010 | 2230/384 | 165 | 21 | 8.4 | 4.5 | 10 | 125*140*200 |
| AP-AA-3010 | 3345/384 | 247.5 | 21 | 8.4 | 4.5 | 10 | 125*140*200 |
Aplikasi utama:
Kanvas sing dicelup, Sabuk Konveyor, Selang Karet
Benang Denier Low Tenacity Tinggi (HTLD)
| Item No | Kapadhetan Linear (dtex/f) | Pecah Force (N) | Elongate ing Break (%) | Break Tenacity (G/D) | HAS (177 ℃ x 1 menit 0,05G/D) (%) | Bobot Bobbin (kg) | Ukuran Tube (mm) |
| AP-HTLD-250 | 280 | 21 | 15 | 8.5 | 6.5 | 8.5 | 110*125*125 |
| AP-HTLD-300 | 333 | 25.3 | 15 | 8.6 | 6.5 | 8.5 | 125*140*200 |
| AP-HTLD-425 | 470 | 35.7 | 15 | 8.6 | 6.5 | 8.5 | 125*140*200 |
| AP-HTLD-500 | 560 | 42.6 | 15 | 8.6 | 6.5 | 8.5 | 125*140*200 |
Aplikasi utama:
Kanvas sing dicelup, Sabuk Konveyor, Selang Karet
Tenacity Dhuwur Low Denier Medium Shrinkage Sewing Thread Benang (MSST)
| Item No | Kapadhetan Linear (dtex/f) | Pecah Force (N) | Elongate ing Break (%) | Break Tenacity (G/D) | HAS (177 ℃ x 1 menit 0,05G/D) (%) | Bobot Bobbin (kg) | Ukuran Tube (mm) |
| AP-MSST-50 | 55/24 | 3.7 | 15 | 7.6 | 5 | 2.5 | 110*125*125 |
| AP-MSST-55 | 61/24 | 4.1 | 15 | 7.6 | 5 | 2.5 | 110*125*125 |
| AP-MSST-70 | 78/24 | 5.3 | 15 | 7.6 | 5 | 2.5 | 110*125*125 |
| AP-MSST-85 | 95/36 | 6.5 | 15 | 7.6 | 5 | 2.5 | 110*125*125 |
| AP-MSST-100 | 111/36 | 7.5 | 15 | 7.6 | 5 | 2.5 | 110*125*125 |
| AP-MSST-150 | 165/32 | 11.6 | 15 | 7.8 | 5 | 4.5 | 110*125*125 |
| AP-MSST-210 | 235/48 | 16.5 | 16 | 7.8 | 5 | 8.5 | 110*125*125 |
| AP-MSST-250 | 280/48 | 19.6 | 16 | 7.8 | 5 | 8.5 | 110*125*125 |
| AP-MSST-300 | 330/96 | 231 | 16 | 7.8 | 5 | 8.5 | 110*125*125 |
| AP-MSST-400 | 455/96 | 32.8 | 16 | 8.2 | 5 | 8.5 | 110*125*125 |
| AP-MSST-500 | 560/96 | 40.3 | 17 | 8.2 | 5 | 8.5 | 110*125*125 |
| AP-MSST-630 | 700/96 | 50.4 | 17 | 8.2 | 4.5 | 8.5 | 110*125*125 |
Aplikasi utama:
Benang Jahit, Tali lan Jaring, Anyaman, Airbag
Benang Penyusutan Kurang Denier Dhuwur (LDLS)
| Item No | Kapadhetan Linear (dtex/f) | Pecah Force (N) | Elongate ing Break (%) | Break Tenacity (G/D) | HAS (177 ℃ x 1 menit 0,05G/D) (%) | Bobot Bobbin (kg) | Ukuran Tube (mm) |
| AP-LDLS-220 | 245/48 | 16.2 | 17 | 7.5 | 3.5 | 8.5 | 110*125*125 |
| AP-LDLS-250 | 280/48 | 18.5 | 17 | 7.5 | 3.5 | 8.5 | 110*125*125 |
| AP-LDLS-300 | 333/96 | 22 | 18 | 7.5 | 3.5 | 8.5 | 110*125*125 |
| AP-LDLS-420 | 470/96 | 31 | 19 | 7.5 | 3.5 | 8.5 | 110*125*125 |
| AP-LDLS-500 | 560/96 | 39.2 | 19 | 8 | 3.25 | 8.5 | 110*125*125 |
| AP-LDLS-500 | 560/96 | 35 | 21 | 7.1 | 2.5 | 9 | 94*108*200 |
Aplikasi utama:
Lapisan / Laminating kain kanggo Flex Banner, Iklan, Kanvas, Tarpaulin lan Air inflating kain, Textilene.
Benang Poliester Super Staple Tanpa Kinerja Crimping (PSSY)
| Item No | Kapadhetan Linear (dtex/f) | Pecah Force (N) | Elongate ing Break (%) | Dhiameter (μmm) | Nyusut Thermal 130 ℃ (%) | panyebaran (n) | Cacat Kertas (No./1cm) | dawa (mm) |
| AP-PSSY-8 | 0.89 | ≥4.9 | 18+6 | 9.0~9.6 | ≤3.0 | ≤25 | ≤0.5 | 3~12 |
| AP-PSSY-12 | 1.33 | ≥5.7 | 23+6 | 9.7~11.0 | ≤3.0 | ≤25 | ≤0.5 | 3~12 |
| AP-PSSY-15 | 1.67 | ≥7.0 | 23+6 | 11.1~14.0 | ≤3.0 | ≤25 | ≤0.5 | 3~12 |
| AP-PSSY-30 | 3.33 | ≥10.0 | 24+6 | 14.1~20.3 | ≤3.0 | ≤25 | ≤0.5 | 3~12 |
| AP-PSSY-60 | 6.67 | ≥20.0 | 24+6 | 20.4~26.8 | ≤3.0 | ≤25 | ≤0.5 | 3~12 |
Aplikasi utama:
Kertas khusus, Pengisi penguat bahan komposit (beton aspal, kapal, kapal perang lan cat), Produk Flocking
Benang Polyester Full Drown (FDY)
| Item No | Kapadhetan Linear (dtex/f) | Pecah Force (N) | Tenacity (g/d) | Elongate ing Break (%) | Nyusut ing banyu nggodhok 30' (%) | Entanglements saben Meter | Bobot Bobbin (kg) | Ukuran Tube (mm) |
| Benang Digambar Penuh Super Cerah (SBFD) | ||||||||
| AP-SBFD-200 | 220/48-144 | 8.8 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
| AP-SBFD-250 | 275/48-144 | 11 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
| AP-SBFD-300 | 330/96-192 | 13.2 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
| AP-SBFD-400 | 440/192-288 | 17.6 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
| AP-SBFD-500 | 550/192-288 | 22 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
| AP-SBFD-600 | 660/192-288 | 26.4 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
| Benang Semi-Dull Fully Drawn (SDFD) | ||||||||
| AP-SDFD-150 | 167/96 | 6.7 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
| AP-SDFD-200 | 220/48-144 | 8.8 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
| AP-SDFD-250 | 275/48-144 | 11 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
| AP-SDFD-300 | 330/96-192 | 13.2 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
| AP-SDFD-400 | 440/192-288 | 17.6 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
| AP-SDFD-500 | 550/192-288 | 22 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
| AP-SDFD-600 | 660/192-288 | 26.4 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
| Item No | Kapadhetan Linear (dtex/f) | Pecah Force (N) | Tenacity (g/d) | Elongate ing Break (%) | Nyusut ing banyu nggodhok 30' (%) | Entanglements saben Meter | Bobot Bobbin (kg) | Ukuran Tube (mm) |
| Benang Trilobal Ditarik Penuh (FDTR) | ||||||||
| AP-FDTR-200 | 220/96 | 8.8 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
| AP-FDTR-250 | 275/96 | 11 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
| AP-FDTR-300 | 330/96 | 13.2 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
| AP-FDTR-400 | 440/192 | 17.6 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
| AP-FDTR-500 | 550/192 | 22 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
| AP-FDTR-600 | 660/192 | 26.4 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
| Benang Berwarna Digambar Penuh (FDCL) | ||||||||
| AP-FDCL-200 | 220/48-96 | 8.8 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
| AP-FDCL-250 | 275/48-96 | 11 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
| AP-FDCL-300 | 330/96 | 13.2 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
| AP-FDCL-400 | 440/192 | 17.6 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
| AP-FDCL-500 | 550/192 | 22 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
| AP-FDCL-600 | 660/192 | 26.4 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
