Endistriyèl segondè tenasite ba elongasyon kontraksyon friksyon ki reziste Polyester PET PES multifilament fil fib
Fil polyester endistriyèl refere a yon wo-fòs, koryas-denier filaman endistriyèl Polyester ak yon rafineman pa mwens pase 550 dtex.Dapre pèfòmans li yo, li ka divize an kalite ekstansyon ki ba gwo fòs (tip nòmal estanda), kalite modil segondè ki ba kontraksyon, gwo fòs ki ba kalite kontraksyon, ak kalite adezif actived.Nan mitan yo, segondè modil ba kontraksyon endistriyèl polyestè fib yo piti piti ranplase òdinè estanda endistriyèl polyester fib nan kawotchou ak pwodwi kawotchou mekanik akòz pwopriyete ekselan yo tankou gwo fòs kraze, segondè modil elastik, elongasyon ki ba, ak bon rezistans enpak.Segondè fòs ba elongasyon endistriyèl polyestè fib gen karakteristik segondè fòs, elongasyon ki ba, modil segondè, ak gwo kontraksyon chalè sèk ki se sitou itilize kòm kòd kawotchou ak senti CONVEYOR, chèn twal, ak senti sekirite machin ak senti transporteurs.Gwo fòs ak ba-kontraksyon kalite endistriyèl polyestè fib retresi yon ti kras apre yo fin chofe, ak twal li yo oswa pwodwi kawotchou trikote gen bon estabilite dimansyon ak estabilite rezistans chalè, ka absòbe chaj enpak, e li gen karakteristik sa yo mou nan nilon.Li se sitou itilize pou twal kouch (twal bwat limyè piblisite, elatriye), trame senti CONVEYOR, elatriye Adezif aktif endistriyèl fib polyester se yon nouvo kalite fil endistriyèl ki gen yon bon afinite ak kawotchou ak PVC, ki ka senplifye pwosesis ki vin apre. teknik ak anpil amelyore kalite pwodwi yo.
Entansyon orijinal la nan devlopman nan fib endistriyèl polyester mutifilament se sèvi ak Polyester ranplase rayon, nilon 6, nilon 66, elatriye kòm materyèl la ankadreman ranfòse nan pwodwi kawotchou.Pwodwi sa yo gen ladann twal kòd radial kawotchou, kawotchou senti CONVEYOR twal kòd, V-senti, kòd senti transmisyon, kòd kawotchou kawotchou ak twal kòd, elatriye.
1. òdinè radial kawotchou kòd twal estanda (òdinè) endistriyèl polyestè filaman fibre tou ke yo rekonèt kòm gwo fòs ba ekstansyon seri ki se gwo fòs, allongement ba ak anwo nan syèl la tèmik réduction.Twal la kòd trikote soti nan sa a kalite fib endistriyèl gen karakteristik sa yo nan gwo fòs ak elongasyon ki ba anba chaj konstan, men pousantaj la kontraksyon chalè sèk se relativman wo.Se poutèt sa, lè w ap itilize sa a kalite twal kòd pou fè kawotchou, fenomèn nan jwenti konkav se evidan.Li dwe gonfle ak fòm epi sèlman vulkanize nan tanperati chanm.Tan vulkanizasyon an se long, to bouyon kawotchou a wo, efikasite pwodiksyon an ba, ak klas kawotchou ki fèt yo ba, ki pa ka satisfè kondisyon ki nan kawotchou radial pèfòmans-wo.
2. nan jaden transporteur ceintures nan ane resan espesyalman pou chabon m' transporteur senti, pifò nan transporteur senti fè gwo fòs ba kontraksyon endistriyèl polyestè fibre kòm pwensipal materyèl kilè eskèlèt gen avantaj ki genyen nan gwo fòs, kò senti mens, bon fleksibilite ak fòmasyon groove.
1) Rezistans enpak segondè fè senti a konvypor gen bon fòs ak rezistans fatig enpak.
2) modil la wo anpil pou faktè sekirite nan senti CONVEYOR Polyester ka pi ba pase sa yo ki an nilon.
3) Bon rezistans imidite fè senti convepor la ka kenbe fòs la chanje apre yo fin mouye ki apwopriye pou itilize nan min mouye.
4) ekstansyon chaj konstan an piti, estabilite dimansyon an bon, ak konjesyon serebral tansyon senti CONVEYOR la piti ki elimine nesesite pou reajisteman akòz deformation etann.
3. kòd la pou senti V-senti transporteur senti a gen pi wo fòs ak modil inisyal pase rayon kòm kòd la te fè nan fib endistriyèl polyester mutifilament apre premye trese, doub trese, ak tranpe epi li gen bon pèfòmans fatig sede.Li se lajman ki itilize nan senti CONVEYOR triyang nan espesifikasyon divès kalite.
4. kòd la te fè nan fib endistriyèl polyester mutifilament pa trese ak mete (oswa tranpe) se materyèl ki pi ideyal kilè eskèlèt pou pwodiksyon an nan kawotchou trese ak kawotchou likidasyon.Kòd Polyester pa sèlman gen gwo fòs, bon estabilite dimansyon, men tou, gen bon estabilite chimik.Kontrèman ak fib vinylon kòm kilè eskèlèt nan yon kawotchou, li pral rezinize lè ekspoze a dlo ki pral afekte lavi sa a ki sèvis nan kawotchou a.
5. gwo fòs usure rezistan endistriyèl polyestè fibre pwodwi ki teknikman amelyore sou orijinal fòs ba fòs endistriyèl polyestè fibre pou machin senti sekirite ranplase enpòte endistriyèl fils Et yo te itilize kòm fil espesyal pou machin senti sekirite.Senti sekirite a trè grate, difisil-mete, fèm ak dirab.Sa a se pwodwi tou lajman ki itilize nan leve senti.
Paramèt
Lis pwodwi | Aplikasyon prensipal yo |
◎ Jeneral High Tenacity (GHT) | Leve senti, senti Convyor, kawoutchou dife, kawotchou, senti fixation, privye lapèch, kòd, jeotèkstil, jeogrid |
◎ Segondè Tenacity ki reziste friksyon (FHT) | Senti sekirite nan otomobil ak avyon, senti, braslè zepòl, filè pwoteksyon tibebe |
◎ Segondè Tenacity ba elongasyon (HTLE) | Twal jeoteknik, Grille travay tè, kòd |
◎ Segondè tenasite ba kontraksyon (TLS) | Twal piblisite pou bwat limyè, twal, bâche, estrikti manbràn nan twal kouvwi |
◎ Segondè Tenacity Super Low Kontraksyon (SLS) | Twal piblisite pou bwat limyè, twal, bâche, estrikti manbràn nan twal kouvwi |
◎ Segondè modil ba kontraksyon (HMLS) | Kawotchou kòd, Geogrid, Triyang Blet, Dip kòd |
◎ Adezif aktive (AA) | Twal tranpe, senti CONVEYOR, kawotchou kawotchou |
◎ High Tenacity Low Denier Fil (HTLD) | Fil koud, kòd ak privye, riban, Tessforest, twal kouch / laminasyon |
◎ Fil tenasite mwayen (MSST, LDLS) | Fil koud, kòd ak privye, sangle, èrbag, twal kouch / laminasyon |
◎ Polyester Super Staple (PSSY) | Papye espesyal, Ranfòse filler nan materyèl konpoze (konkrè asfalt, bato, bato de gè ak penti), flokaj pwodwi |
◎ FDY (Super Bright, SD, koulè) | Twal knitted, sak ak twal valiz |
Jeneral High Tenacity Polyester (GHT)
Atik No | Dansite lineyè (dtex/f) | Fòs kraze (N) | Elongate nan Break (%) | Kraze Tenacity (G/D) | EASL (@4.0cN/dtex) (%) | GENYEN (177℃x1minx 0.05G/D) (%) | Pwa Bobbin (KG) | Gwosè Tib (mm) |
AP-GHT-840 | 930/192 | 76.1 | 14 | 9,2 | 5.2 | 7 | 10 | 125*140*200 |
AP-GHT-1000 | 1110/192 | 91.1 | 14 | 9.2 | 5.5 | 7 | 10 | 125*140*200 |
AP-GHT-1300 | 1440/192 | 117.5 | 14 | 9.2 | 6 | 7 | 11 | 94*108*200 |
AP-GHT-1500 | 1670/192 | 136.5 | 14 | 9.2 | 6 | 7 | 11 | 94*108*200 |
AP-GHT-2000 | 2220/384 | 182.3 | 14 | 9.2 | 6.5 | 7 | 10 | 125*140*200 |
AP-GHT-2600 | 2890/384 | 237.3 | 14 | 9.2 | 7 | 7 | 11 | 94*108*200 |
AP-GHT-3000 | 3330/384 | 273 | 14 | 9.2 | 7 | 7 | 11 | 94*108*200 |
AP-GHT-4000 | 4440/768 | 360 | 14 | 9.1 | 7 | 7 | 10 | 125*140*200 |
AP-GHT-5000 | 5550/768 | 445.6 | 15.5 | 9.1 | 7 | 7 | 12 | 94*108*300 |
AP-GHT-6000 | 6660/768 | 539.2 | 15.5 | 9.1 | 7.5 | 7 | 12 | 94*108*300 |
Aplikasyon prensipal:
Triyangilè senti, anvwaye senti, transporteur senti, kawotchou dife, kawotchou, senti fixation, senti bagaj, privye lapèch, kòd, kab, fil nwayo, geotextile, geogrid
Segondè Tenacity Polyester ki reziste friksyon (FHT)
Atik No | Dansite lineyè (dtex/f) | Fòs kraze (N) | Elongate nan Break (%) | Kraze Tenacity (G/D) | EASL (@4.0cN/dtex) (%) | GENYEN (177℃x1minx 0.05G/D) (%) | Pwa Bobbin (KG) | Gwosè Tib (mm) |
AP-FHT-1000 | 1110/96 | 87.8 | 14 | 8.9 | 7 | 6.5 | 10 | 94*108*200 |
AP-FHT-1500 | 1670/96 | 131.4 | 14 | 8.9 | 6.5 | 6.5 | 10 | 94*108*200 |
AP-FHT-1500 | 1670/144 | 132.6 | 14 | 9 | 7 | 7.5 | 10 | 94*108*200 |
Aplikasyon prensipal:
Twal Dansite segondè, Geotextile, Geogrid
Segondè tenasite ba kontraksyon Polyester (TLS)
Atik No | Dansite lineyè (dtex/f) | Fòs kraze (N) | Elongate nan Break (%) | Kraze Tenacity (G/D) | GENYEN (177℃x1minx 0.05G/D) (%) | Pwa Bobbin (KG) | Gwosè Tib (mm) |
AP-TLS-850 | 940/192 | 65.8 | 20 | 7.9 | 3.25 | 10 | 125*140*200 |
AP-TLS-940 | 1043/192 | 73.5 | 20 | 8 | 3.25 | 10 | 125*140*200 |
AP-TLS-1000 | 1110/192 | 79.2 | 21 | 8 | 3.25 | 10 | 125*140*200 |
AP-TLS-2000 | 2220/384 | 158.3 | 21 | 8 | 3.25 | 10 | 125*140*200 |
AP-TLS-3000 | 3330/384 | 236.4 | 22 | 8 | 3.25 | 10 | 125*140*200 |
Aplikasyon prensipal:
Twal kouvwi, twal, tant pou oto, materyèl enflatab, twal lonbraj, twal ki enpèmeyab, twal bwat limyè piblisite, parapli plaj, twal bilding, twal filtre ak materyèl sak
Segondè Tenacity Super Low Kontraksyon (SLS)
Atik No | Dansite lineyè (dtex/f) | Fòs kraze (N) | Elongate nan Break (%) | Kraze Tenacity (G/D) | GENYEN (177℃x1minx 0.05G/D) (%) | Pwa Bobbin (KG) | Gwosè Tib (mm) |
AP-SLS-500 | 560/96 | 35 | 21 | 7.1 | 2.5 | 9 | 94*108*200 |
AP-SLS-840 | 930/192 | 64.9 | 22 | 7.8 | 2.25 | 11 | 94*108*200 |
AP-SLS-1000 | 1110/192 | 76.9 | 22 | 7.8 | 2.25 | 11 | 94*108*200 |
AP-SLS-1300 | 1440/192 | 99.7 | 22 | 7.8 | 2.25 | 10 | 125*140*200 |
AP-SLS-1500 | 1670/192 | 115.2 | 22 | 7.8 | 2.25 | 10 | 125*140*200 |
AP-SLS-2000 | 2220/384 | 153.9 | 22 | 7.8 | 2.25 | 10 | 125*140*200 |
AP-SLS-3000 | 3330/384 | 229.8 | 22 | 7.8 | 2.25 | 10 | 125*140*200 |
Aplikasyon prensipal:
Twal kouvwi, twal, tant pou oto, materyèl enflatab, twal lonbraj, twal ki enpèmeyab, twal bwat limyè piblisite, parapli plaj, twal bilding, enstalasyon gazon, twal filtraj, materyèl sak, ayewopò ak sant egzibisyon materyèl estrikti manbràn.
Segondè modil Polyester ki ba kontraksyon (HMLS)
Atik No | Dansite lineyè (dtex/f) | Fòs kraze (N) | Elongate nan Break (%) | Kraze Tenacity (G/D) | EASL (@4.0cN/dtex) (%) | GENYEN (177℃x1minx 0.05G/D) (%) | Pwa Bobbin (KG) | Gwosè Tib (mm) |
AP-HMLS-1000 | 1120/240 | 78.4 | 13.5 | 8 | 6 | 2.5 | 12 | 94*110*300 |
AP-HMLS-1000 | 1120/320 | 80.6 | 12.5 | 8.2 | 5.5 | 3 | 12 | 94*110*300 |
AP-HMLS-1300 | 1450/360 | 101.5 | 13.5 | 8 | 6 | 2.5 | 11 | 110 * 124 * 300 |
AP-HMLS-1300 | 1450/360 | 104.4 | 12.5 | 8.2 | 5.5 | 3 | 11 | 110 * 124 * 300 |
AP-HMLS-1500 | 1670/360 | 116.9 | 13.5 | 8 | 6 | 2.5 | 11 | 110 * 126 * 300 |
AP-HMLS-1500 | 1670/480 | 120.2 | 12.5 | 8.2 | 5.5 | 3 | 11 | 110 * 126 * 300 |
AP-HMLS-2025 | 2250/480 | 153 | 13.5 | 7.7 | 6 | 3 | 12 | 94*110*300 |
Aplikasyon prensipal:
Kawotchou machin, twal rido, twal, kòd, jeotèkstil.
Adezif aktive (AA)
Atik No | Dansite lineyè (dtex/f) | Fòs kraze (N) | Elongate nan Break (%) | Kraze Tenacity (G/D) | EASL (@4.0cN/dtex) (%) | GENYEN (177℃x1minx 0.05G/D) (%) | Pwa Bobbin (KG) | Gwosè Tib (mm) |
AP-AA-1010 | 1125/192 | 87.8 | 14 | 8.9 | 6 | 7 | 10 | 125*140*200 |
AP-AA-1520 | 1685/192 | 131.4 | 14 | 8.9 | 6.5 | 6.5 | 11 | 94*108*200 |
AP-AA-2025 | 2250/384 | 175.5 | 14.5 | 8.9 | 6.5 | 6.5 | 10 | 125*140*200 |
AP-AA-2600 | 2890/384 | 225.4 | 14.5 | 8.9 | 6.5 | 6.5 | 10 | 125*140*200 |
AP-AA-3000 | 3370/384 | 262.9 | 14.5 | 8.9 | 6.5 | 6.5 | 11 | 94*108*200 |
Atik No | Dansite lineyè (dtex/f) | Fòs kraze (N) | Elongate nan Break (%) | Kraze Tenacity (G/D) | EASL (@4.0cN/dtex) (%) | GENYEN (177℃x1minx 0.05G/D) (%) | Pwa Bobbin (KG) | Gwosè Tib (mm) |
AP-AA-1000 | 1115/192 | 87 | 16 | 8.9 | 6.5 | 5 | 10 | 125*140*200 |
AP-AA-1500 | 1675/192 | 130.7 | 16 | 8.9 | 6.5 | 5 | 11 | 94*108*200 |
AP-AA-2000 | 2230/384 | 173.9 | 16 | 8.9 | 6.5 | 5 | 10 | 125*140*200 |
AP-AA-3010 | 3345/384 | 260.9 | 16 | 8.9 | 6.5 | 5 | 11 | 125*140*200 |
Atik No | Dansite lineyè (dtex/f) | Fòs kraze (N) | Elongate nan Break (%) | Kraze Tenacity (G/D) | GENYEN (177℃x1minx 0.05G/D) (%) | Pwa Bobbin (KG) | Gwosè Tib (mm) |
AP-AA-840 | 930/192 | 68.8 | 21 | 8.4 | 4.5 | 10 | 125*140*200 |
AP-AA-1000 | 1115/192 | 82.5 | 21 | 8.4 | 4.5 | 10 | 125*140*200 |
AP-AA-1300 | 1440/192 | 106.6 | 21 | 8.4 | 4.5 | 10 | 125*140*200 |
AP-AA-1500 | 1675/192 | 124 | 21 | 8.4 | 4.5 | 10 | 125*140*200 |
AP-AA-2010 | 2230/384 | 165 | 21 | 8.4 | 4.5 | 10 | 125*140*200 |
AP-AA-3010 | 3345/384 | 247.5 | 21 | 8.4 | 4.5 | 10 | 125*140*200 |
Aplikasyon prensipal:
Twal tranpe, senti CONVEYOR, kawotchou kawotchou
High Tenacity Low Denier Fil (HTLD)
Atik No | Dansite lineyè (dtex/f) | Fòs kraze (N) | Elongate nan Break (%) | Kraze Tenacity (G/D) | GENYEN (177℃x1minx 0.05G/D) (%) | Pwa Bobbin (KG) | Gwosè Tib (mm) |
AP-HTLD-250 | 280 | 21 | 15 | 8.5 | 6.5 | 8.5 | 110*125*125 |
AP-HTLD-300 | 333 | 25.3 | 15 | 8.6 | 6.5 | 8.5 | 125*140*200 |
AP-HTLD-425 | 470 | 35.7 | 15 | 8.6 | 6.5 | 8.5 | 125*140*200 |
AP-HTLD-500 | 560 | 42.6 | 15 | 8.6 | 6.5 | 8.5 | 125*140*200 |
Aplikasyon prensipal:
Twal tranpe, senti CONVEYOR, kawotchou kawotchou
Segondè tenasite ba denier mwayen kontraksyon fil koud fil (MSST)
Atik No | Dansite lineyè (dtex/f) | Fòs kraze (N) | Elongate nan Break (%) | Kraze Tenacity (G/D) | GENYEN (177℃x1minx 0.05G/D) (%) | Pwa Bobbin (KG) | Gwosè Tib (mm) |
AP-MSST-50 | 55/24 | 3.7 | 15 | 7.6 | 5 | 2.5 | 110*125*125 |
AP-MSST-55 | 61/24 | 4.1 | 15 | 7.6 | 5 | 2.5 | 110*125*125 |
AP-MSST-70 | 78/24 | 5.3 | 15 | 7.6 | 5 | 2.5 | 110*125*125 |
AP-MSST-85 | 95/36 | 6.5 | 15 | 7.6 | 5 | 2.5 | 110*125*125 |
AP-MSST-100 | 111/36 | 7.5 | 15 | 7.6 | 5 | 2.5 | 110*125*125 |
AP-MSST-150 | 165/32 | 11.6 | 15 | 7.8 | 5 | 4.5 | 110*125*125 |
AP-MSST-210 | 235/48 | 16.5 | 16 | 7.8 | 5 | 8.5 | 110*125*125 |
AP-MSST-250 | 280/48 | 19.6 | 16 | 7.8 | 5 | 8.5 | 110*125*125 |
AP-MSST-300 | 330/96 | 231 | 16 | 7.8 | 5 | 8.5 | 110*125*125 |
AP-MSST-400 | 455/96 | 32.8 | 16 | 8.2 | 5 | 8.5 | 110*125*125 |
AP-MSST-500 | 560/96 | 40.3 | 17 | 8.2 | 5 | 8.5 | 110*125*125 |
AP-MSST-630 | 700/96 | 50.4 | 17 | 8.2 | 4.5 | 8.5 | 110*125*125 |
Aplikasyon prensipal:
Koud Fil, kòd ak filè, sangle, èrbag
High Tenacity Low Denier Low Shrinkage Fil (LDLS)
Atik No | Dansite lineyè (dtex/f) | Fòs kraze (N) | Elongate nan Break (%) | Kraze Tenacity (G/D) | GENYEN (177℃x1minx 0.05G/D) (%) | Pwa Bobbin (KG) | Gwosè Tib (mm) |
AP-LDLS-220 | 245/48 | 16.2 | 17 | 7.5 | 3.5 | 8.5 | 110*125*125 |
AP-LDLS-250 | 280/48 | 18.5 | 17 | 7.5 | 3.5 | 8.5 | 110*125*125 |
AP-LDLS-300 | 333/96 | 22 | 18 | 7.5 | 3.5 | 8.5 | 110*125*125 |
AP-LDLS-420 | 470/96 | 31 | 19 | 7.5 | 3.5 | 8.5 | 110*125*125 |
AP-LDLS-500 | 560/96 | 39.2 | 19 | 8 | 3.25 | 8.5 | 110*125*125 |
AP-LDLS-500 | 560/96 | 35 | 21 | 7.1 | 2.5 | 9 | 94*108*200 |
Aplikasyon prensipal:
Kouch / Laminage twal pou Flex Banner, Piblisite, twal, bâche ak Air gonfle twal, Textilene.
Polyester Super Staple Fil san Crimping pèfòmans (PSSY)
Atik No | Dansite lineyè (dtex/f) | Fòs kraze (N) | Elongate nan Break (%) | Dyamèt (μmm) | Tèmik kontraksyon 130℃ (%) | Dispersite (n) | Defo papye (No / 1cm) | Longè (mm) |
AP-PSSY-8 | 0.89 | ≥4.9 | 18+6 | 9.0 ~ 9.6 | ≤3.0 | ≤25 | ≤0.5 | 3 ~ 12 |
AP-PSSY-12 | 1.33 | ≥5.7 | 23+6 | 9.7 ~ 11.0 | ≤3.0 | ≤25 | ≤0.5 | 3 ~ 12 |
AP-PSSY-15 | 1.67 | ≥7.0 | 23+6 | 11.1 ~ 14.0 | ≤3.0 | ≤25 | ≤0.5 | 3 ~ 12 |
AP-PSSY-30 | 3.33 | ≥10.0 | 24+6 | 14.1 ~ 20.3 | ≤3.0 | ≤25 | ≤0.5 | 3 ~ 12 |
AP-PSSY-60 | 6.67 | ≥20.0 | 24+6 | 20.4 ~ 26.8 | ≤3.0 | ≤25 | ≤0.5 | 3 ~ 12 |
Aplikasyon prensipal:
Papye espesyal, Ranfòse filler nan materyèl konpoze (konkrè asfalt, bato, bato de gè ak penti), Flokaj pwodwi
Polyester Full Down Fil (FDY)
Atik No | Dansite lineyè (dtex/f) | Fòs kraze (N) | Tenasite (g/d) | Elongate nan Break (%) | Kontraksyon nan dlo bouyi 30' (%) | Entanglements pou chak mèt | Pwa Bobbin (KG) | Gwosè Tib (mm) |
Super Bright Fully Drawn Fil (SBFD) | ||||||||
AP-SBFD-200 | 220/48-144 | 8.8 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
AP-SBFD-250 | 275/48-144 | 11 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
AP-SBFD-300 | 330/96-192 | 13.2 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
AP-SBFD-400 | 440/192-288 | 17.6 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
AP-SBFD-500 | 550/192-288 | 22 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
AP-SBFD-600 | 660/192-288 | 26.4 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
Semi-mat konplètman trase fil (SDFD) | ||||||||
AP-SDFD-150 | 167/96 | 6.7 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
AP-SDFD-200 | 220/48-144 | 8.8 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
AP-SDFD-250 | 275/48-144 | 11 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
AP-SDFD-300 | 330/96-192 | 13.2 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
AP-SDFD-400 | 440/192-288 | 17.6 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
AP-SDFD-500 | 550/192-288 | 22 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
AP-SDFD-600 | 660/192-288 | 26.4 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
Atik No | Dansite lineyè (dtex/f) | Fòs kraze (N) | Tenasite (g/d) | Elongate nan Break (%) | Kontraksyon nan dlo bouyi 30' (%) | Entanglements pou chak mèt | Pwa Bobbin (KG) | Gwosè Tib (mm) |
Fil trilobal konplètman trase (FDTR) | ||||||||
AP-FDTR-200 | 220/96 | 8.8 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
AP-FDTR-250 | 275/96 | 11 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
AP-FDTR-300 | 330/96 | 13.2 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
AP-FDTR-400 | 440/192 | 17.6 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
AP-FDTR-500 | 550/192 | 22 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
AP-FDTR-600 | 660/192 | 26.4 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
Fil ki gen koulè konplètman trase (FDCL) | ||||||||
AP-FDCL-200 | 220/48-96 | 8.8 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
AP-FDCL-250 | 275/48-96 | 11 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
AP-FDCL-300 | 330/96 | 13.2 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
AP-FDCL-400 | 440/192 | 17.6 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
AP-FDCL-500 | 550/192 | 22 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |
AP-FDCL-600 | 660/192 | 26.4 | 4.5 | 28 | 7 | 8 | 8 | 110*125*115 |